The advanced tutorials introduce some of the features that could not be covered in detail in any of the other tutorial sections. For this series of tutorials we are going to use some of the files already created through out the series of tutorials and use them to perform additional operations that are detailed below.

 

The operations covered in this tutorial section are not available in all versions of PoreXpert, each tutorial section will identify if the feature is available.

 

If files are used in the tutorials, they will be stated in the appropriate tutorial.

 

Summary of advanced operations

1.Super Source Positioning
a.Explain the built in positions.
b.Explain how to use the manual super source position to perform a wetting fluid uptake simulation.
2.Cell Engineering
a.Create a unit cell without an experimental data file.
b.Manipulation of fitting parameters to investigate the effect on permeability.
3.PoreBatch
a.Using the PoreBatch system to fit two different structure types, calculate permeability and wetting of the sample with water for 0.2ms from the front of the unit cell.
i.Create a Batch file and then run PoreBatch.
ii.For computers with multiple cores, the example will run in parallel.
4.Appending Operations
a.Adding intermediate wetting steps into a list of operations.